山本研究室

Contents menu

研究業績

[2020]

    1. Tensile-Strength-Controlling Factors in Unidirectional Carbon Fiber Reinforced Plastic Composites
      Go Yamamoto, Keita Koizumi, Takahiro Nakamura, Noriyuki Hirano, Tomonaga Okabe
      Composites Part A, in press   PDF file

[2019]

    1. Enhanced tribological performance of alumina composites reinforced with acid-treated carbon nanotubes under water lubrication
      Keiichi Shirasu, Takuto Miyaura, Go Yamamoto, Takaharu Suzuki, Kimiyoshi Naito, Toshiyuki Hashida
      Diamond & Related Materials 101 (2020) 107657   PDF file
      10.1016/j.diamond.2019.107657
    2. Effects of high-temperature thermal annealing on properties of aligned multi-walled carbon nanotube sheets and their composites
      Tran Huu Nam, Ken Goto, Yoshinobu Shimamura, Yoku Inoue, Go Yamamoto, Keiichi Shirasu, Toshiyuki Hashida
      Composite Interfaces (in-press)    PDF file
      10.1080/09276440.2019.1670000
    3. Stack-coating of multishell carbon layers templated with carbon nanotubes
      Keiichi Shirasua, Miho Asaoka, Takamichi Miyazaki, Go Yamamoto, Toshiyuki Hashida
      Materials Today Communications 21 (2019) 100608    PDF file
      10.1016/j.mtcomm.2019.100608
    4. Numerical study for tensile strength prediction of unidirectional carbon fiber-reinforced composite considering fiber surface stress concentration
      Go Yamamoto and Tomonaga Okabe
      Mechanical Engineering Journal, 6, (2019) 19-00020.    PDF file
      10.1299/mej.19-00020
    5. Considering the stress concentration of fiber surfaces in the prediction of the tensile strength of unidirectional carbon fiber-reinforced plastic composites
      Go Yamamoto, Miho Onodera, Keita Koizumi, Jun Watanabe, Haruki Okuda, Fumihiko Tanaka, and Tomonaga Okabe
      Composites Part A, 121, (2019) 499-509.    PDF file
      10.1016/j.compositesa.2019.04.011
    6. How do the mechanical properties of carbon nanotubes increase? An experimental evaluation and modeling of the engineering tensile strength of individual carbon nanotubes
      Keiichi Shirasu, Go Yamamoto and Toshiyuki Hashida
      Materials Research Express, 6 (2019), 055047.    PDF file
      10.1088/2053-1591/ab069f
    7. Mechanical and thermal expansion properties of aligned carbon nanotube reinforced epoxy composites
      Keiichi SHIRASU, Itaru TAMAKI, Go YAMAMOTO, Toshiyuki HASHIDA
      Mechanical Engineering Journal, 6, (2019) 19-00012.   PDF file
      10.1299/mej.19-00012

[2018]

    1. 無撚カーボンナノチューブ糸の機械的特性に及ぼす黒鉛化の影響と強度発現機構
      金太成，林晏理，二川秀史，白須圭一，山本剛，橋田俊之，細井厚志，川田宏之
      日本機械学会論文集, 2018, in press.   PDF file
      doi.org/10.1299/transjsme.17-00585
    2. Investigating nanostructures in carbon fibres using Raman spectroscopy
      Haruki Okuda, Robert J. Young, Daniel Wolverson, Fumihiko Tanaka, Go Yamamoto, and Tomonaga Okabe
      Carbon 130 (2018) 178-184  PDF file
    3. Fracture behavior of diamond-like carbon films deposited on polymer substrates
      Go Yamamoto, Tomonaga Okabe, and Noriaki Ikenaga
      Journal of Vacuum Science & Technology A, 36, (2018), Article No. 02C101.   PDF file
      10.1116/1.5003683

[2017]

    1. Development of large-movements and high-force electrothermal bimorph actuators based on aligned carbon nanotube reinforced epoxy composites
      Keiichi Shirasu, Go Yamamoto, Yoku Inoue, Toshio Ogasawara, Yoshinobu Shimamura, and Toshiyuki Hashida
      Sensors & Actuators A: Physical, 267, (2017) 455-463.  PDF file
      10.1016/j.sna.2017.10.051
    2. Influence of supported PtPd nanoparticles on the tensile strength of individual multi-walled carbon nanotubes: Strength decrease by the interaction of metal and nanotube
      Hideaki Suzuki, Tatsuhito Kimura, Go Yamamoto, Toshiyuki Hashida, Kenichi Motomiya, Kazuyuki Tohji, and Yoshinori Sato
      RSC Advances 7, (2017) 49917-49922.   PDF file
      10.1039/C7RA09340C
    3. Key factors limiting carbon nanotube strength: Structural characterization and mechanical properties of multi-walled carbon nanotubes
      Keiichi SHIRASU, Itaru TAMAKI, Takamichi MIYAZAKI, Go YAMAMOTO, Raman BEKAREVICH, Kaori HIRAHARA, Yoshinobu SHIMAMURA, Yoku INOUE, Toshiyuki HASHIDA
      Mechanical Engineering Journal Vol. 4(2017) No. 5 P. 17-00029.  PDF file
      10.1299/mej.17-00029
    4. 多層カーボンナノチューブの強度・破壊特性評価と構造欠陥の影響に関する研究
      玉木 格，白須圭一，宮崎孝道，山本剛，Raman Bekarevich, 平原 佳織，島村佳伸，井上翼，橋田俊之
      日本機械学会論文集, Vol. 83, No. 847, Article No. 16-00283.   PDF file
      10.1299/transjsme.16-00283.
    5. Is the tensile strength of carbon nanotubes enhanced by supported materials?: Effect of supported amorphous alumina nanoparticles on the tensile strength of carbon nanotubes
      Tatsuhito Kimura, Hideaki Suzuki, Mei Zhang, Go Yamamoto, Toshiyuki Hashida, Kenichi Motomiya, Tohji Kazuyuki and Yoshinori Sato
      Carbon, 118(1), (2017), 339-342.   PDF file
      10.1016/j.carbon.2017.03.057
    6. Potential use of CNTs for production of zero thermal expansion coefficient composite materials: An experimental evaluation of axial thermal expansion coefficient of CNTs using a combination of thermal expansion and uniaxial tensile tests
      Keiichi Shirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida
      Composites Part A 95, (2017), 152-160.  PDF file
      10.1016/j.compositesa.2016.12.027
    7. First-principles study of interfacial interaction between carbon nanotube and Al2O3(0001)
      Irfan Dwi Aditya, Daisuke Matsunaka, Yoji Shibutani and Go Yamamoto
      Journal of Applied Physics 121, 2, (2017), Article number 025304.  PDF file
      10.1063/1.4973741
    8. Multi-objective optimization for resin transfer molding process
      Tomonaga Okabe, Yutaka Oya, Go Yamamoto, Junki Sato, Tsubasa Matsumiya, Ryosuke Matsuzaki, Shigeki Yashiro and Shigeru Obayashi
      Composites Part A 92, 1, (2017), 1-9.  PDF file
      10.1016/j.compositesa.2016.09.023
    9. 円孔を有する不連続炭素繊維強化熱可塑性プラスチックの引張強度予測
      山本剛，坂本鎌治，岡部朋永，橋本雅弘，平野啓之
      日本複合材料学会誌，43，3（2017)，104-111  PDF file

[2016]

    1. 多層カーボンナノチューブにおける軸方向線膨張係数の温度依存性に関する研究（配向カーボンナノチューブ/エポキシ複合材料の線膨張測定に基づく手法）
      白須 圭一，中村 彰宏，山本 剛，小笠原 俊夫, 島村 佳伸，井上 翼，橋田 俊之
      日本機械学会論文集, Vol. 82, No. 844, Article No. 16-00228.  PDF file
      10.1299/transjsme.16-00228
    2. CFRPの層間靱性に及ぼすCNT添加の影響評価.
      吉岡健一,Felix NGUYEN, Swezin THAN TUN, 山本剛,岡部朋永
      日本複合材料学会誌,42(5),(2016)  PDF file
    3. In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites. Weiwei Zhou, Go Yamamoto, Yuchi Fan, Hansang Kwon, Toshiyuki Hashida and Akira Kawasaki
      Carbon,106,(2016),37-47  PDF file
      10.1016/j.carbon.2016.05.015
    4. ばね要素モデルを用いた一方向炭素繊維/エポキシ複合材料の引張強度予測
      渡邉潤, 田中文彦, 松谷浩明, 奥田治己, 津田皓正, 樋口諒, 山本剛, 岡部朋永
      材料システム,34,(2016),15-19  PDF file
    5. Preparation and Performance Evaluation of Electrothermal Actuators using Aligned Carbon Nanotube Reinforced Epoxy Composites.
      Keiichi Shirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida
      Mechanical Engineering Journal,3(4),(2016)  PDF file
      10.1299/mej.15-00607

[2015]

    1. Negative axial thermal expansion coefficient of carbon nanotubes: Experimental determination based on measurements of coefficient of thermal expansion for aligned carbon nanotube reinforced epoxy composites.
      Keiichi Shirasu, Go Yamamoto, Itaru Tamaki, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue, Toshiyuki Hashida
      Carbon,95,(2015),904-905  PDF file
      10.1016/j.carbon.2015.09.026 　
    2. SYNTHESIS OF CARBON NANOTUBES-NI COMPOSITE FOR MICROMECHANICAL ELEMENTS APPLICATION.
      Zhonglie An, Masaya Toda, Go Yamamoto, Toshiyuki Hashida, and Takahito Ono
      Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems,(2015),401-404  PDF file
      10.1109/MEMSYS.2015.7050974 　
    3. Relationship between microstructure and mechanical properties in acid-treated carbon nanotube-reinforced alumina composites.
      Keiichi Shirasu, Go Yamamoto, Yo Nozaka, Weili Wang, Toshiyuki Hashida
      Journal of Materials Science,50,(2015),6688-6699  PDF file
      10.1007/s10853-015-9223-6 　
    4. Effects of processing conditions on microstructure, electrical conductivity and mechanical properties of MWCNT/alumina composites prepared by flocculation.
      Weili Wang, Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Toshiyuki Hashida
      Journal of the European Ceramic Society,35,(2015),3903-3908  PDF file
      10.1016/j.jeurceramsoc.2015.06.027 　
    5. Microstructuring of carbon nanotubes-nickel nanocomposite.
      Zhonglie An, Liang He, Masaya Toda, Go Yamamoto, Toshiyuki Hashida and Takahito Ono
      Nanotechnology,26,(2015),195601 (8pp)-  PDF file
      10.1088/0957-4484/26/19/195601 　

[2014]

    1. Structure-property relationships in thermally-annealed multi-walled carbon nanotubes.
      Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Yoshinori Sato, Toshiyuki Takagi, Toshiyuki Hashida
      Carbon,66,(2014),219-226
      10.1016/j.carbon.2013.08.061 　
    2. Microstructure-property relationships in pressureless-sintered carbon nanotube/alumina composites.
      Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Weili Wang, Toshiyuki Hashida
      Materials Science & Engineering A,617,(2014),179-186
      10.1016/j.msea.2014.08.068 　
    3. Fabrication and Characterization of Silicon Micromirror with Carbon nanotubes-Nickel Nanocomposite Beams.
      Zhonglie An, Masaya Toda, Go Yamamoto, Toshiyuki Hashida and Takahito Ono
      Proceeding of the 14th IEEE International Conference on Nanotechnology,(2014),888-892 　
    4. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MULTI-WALLED CARBON NANOTUBE/ALUMINA COMPOSITES PREPARED BY A NOVEL FLOCCULATION METHOD.
      W.L. Wang, G. Yamamoto, K. Shirasu, Y. Nozaka, T. Hashida
      Proceedings of the 16th European Conference on Composite Materials,(2014) 　
    5. FABRICATION AND MECHANICAL EVALUATION OF ALIGNED MULTI-WALLED CARBON NANOTUBE SHEET/ALUMINA LAMINATED CERAMIC COMPOSITES.
      Yamamoto, K. Shirasu, Y. Nozaka, Y. Shimamura, Y. Inoue, T. Hashida
      Proceedings of the 16th European Conference on Composite Materials,(2014)G. 　
    6. Structural and Electrochemical Characterization of Ethylenediaminated Single-Walled Carbon Nanotubes Prepared from Fluorinated SWCNTs.
      Kohei Bushimata, Shin-ichi Ogino, Kazutaka Hirano, Tatsuhiro Yabune, Kenta Sato, Takashi Itoh, Kenichi Motomiya, Koji Yokoyama, Daiki Mabuchi, Hikaru Nishizaka, Go Yamamoto, Toshiyuki Hashida, Kazuyuki Tohji, and Yoshinori Sato
      The Journal of Physical Chemistry C,118,(2014),14948-14956
      10.1021/jp503124n 　
    7. Tensile mechanical properties of carbon nanotube/epoxy composite fabricated by pultrusion of carbon nanotube spun yarn preform.
      Yoshinobu Shimamura, Kahori Oshima, Keiichiro Tohgo, Tomoyuki Fujii, Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida, Ken Goto, Toshio Ogasawara, Kimiyoshi Naito, Takayuki Nakano, Yoku Inoue
      Composites: Part A,62,(2014),32-38
      10.1016/j.compositesa.2014.03.011 　
    8. Inclined slit-based pullout method for determining interfacial strength of multi-walled carbon nanotube-alumina composites.
      Yo Nozaka, Weili Wang, Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida
      Carbon,78,(2014),439-445
      10.1016/j.carbon.2014.07.024 　

[2013]

    1. Pull-out simulations of a capped carbon nanotube in carbon nanotube-reinforced nanocomposites.
      Y. Li, S. Liu, N. Hu, X. Han, L. Zhou, H. Ning, L. Wu, Alamusi, G. Yamamoto, C. Chang, T. Hashida, S. Atobe, and H. Fukunaga
      Journal of Applied Physics,113,(2013),144304 (7pp)-
      10.1063/1.4800110 　
    2. Development of Pressureless Sintering Method for Carbon Nanotube/Alumina Composites and Their Microstructure-Property Relationships.
      Go YAMAMOTO, Keiichi SHIRASU, Yo NOZAKA, Takahumi NAKAMURA and Toshiyuki HASHIDA
      Journal of Solid Mechanics and Materials Engineering,7(3),(2013),394-402
      10.1299/immp.7.394 　
    3. 常圧焼成法により作製したカーボンナノチューブ/アルミナ複合材料の機械的特性および微細組織評価に関する研究.
      野坂陽, 山本剛, 白須圭一, 大森守, 高木敏行, 橋田俊之
      日本機械学会論文集(A編),79(802),(2013),764-768 　
    4. カーボンナノチューブ/アルミナ複合材料の破壊特性に及ぼすカーボンナノチューブのアニール処理の影響.
      白須圭一, 山本剛, 野坂陽, 大森守, 橋田俊之
      日本機械学会論文集(A編),79(802),(2013),706-710 　

[2012]

    1. カーボンナノチューブ/アルミナ複合材料の機械的特性に及ぼすカーボンナノチューブ表面修飾の影響に関する研究.
      山本剛, 白須圭一, 野坂陽, 大森守, 高木敏行, 橋田俊之
      日本機械学会論文集(A編),78(790),(2012),843-854 　
    2. Prediction of pull-out force of multi-walled carbon nanotube (MWCNT) in sword-in-sheath mode.
      Go Yamamoto, Sen Liu, Ning Hu, Toshiyuki Hashida, Yaolu Liu, Cheng Yan, Yuan Li, Hao Cui, Huiming Ning, Liangke Wu
      Computational Materials Science,60,(2012),7-12
      10.1016/j.commatsci.2012.03.016 　
    3. Influence of the structure of the nanotube on the mechanical properties of binder-free multi-walled carbon nanotube solids.
      Yoshinori Sato, Hikaru Nishizaka, Shunichi Sawano, Atsushi Yoshinaka, Kazutaka Hirano, Shinji Hashiguchi, Takayuki Arie, Seiji Akita, Go Yamamoto, Toshiyuki Hashida, Hisamichi Kimura, Kenichi Motomiya, Kazuyuki Tohji
      Carbon,50,(2012),34-39
      10.1016/j.carbon.2011.07.047 　
    4. MEASUREMENTS OF CARBON NANOTUBE TENSILE STRENGTH AND MECHANICAL PROPERTIES OF CARBON NANOTUBE/ALUMINA COMPOSITES PREPARED BY PRESSURELESS SINTERING.
      G. Yamamoto, K. Shirasu, Y. Nozaka, T. Takagi, T. Hashida
      Proceedings of the 15th European Conference on Composite Materials,(2012) 　
    5. FABRICATION AND EVALUATION OF CARBON NANOTUBE/ALUMINA COMPOSITES BY PRECURSOR METHOD.
      K. Shirasu, G. Yamamoto, Y. Nozaka, M. Omori, T. Hashida
      Proceedings of the 15th European Conference on Composite Materials,(2012) 　

[2011]

    1. Nanotube fracture during the failure of carbon nanotube/alumina composites.
      Go Yamamoto, Keiichi Shirasu, Toshiyuki Hashida, Toshiyuki Takagi, Ji Won Suk, Jinho An, Richard D. Piner, Rodney S. Ruoff
      Carbon,49,(2011),3709-3716
      10.1016/j.carbon.2011.04.022 　
    2. カーボンナノチューブ/アルミナ複合材料の作製と破壊機構の解明に関する研究.
      白須圭一, 山本剛, 大森守, 高木敏行, 橋田俊之
      日本機械学会論文集(A編),77(779),(2011),1041-1045 　
    3. カーボンナノチューブ/アルミナ複合材料の強度特性に及ぼすカーボンナノチューブ表面修飾の影響と破壊過程に関する研究.
      白須圭一, 山本剛, 大森守, 相沢養市, 橋田俊之
      日本機械学会論文集(A編),77(777),(2011),774-778 　
    4. 単繊維引抜き試験によるカーボンナノチューブ/アルミナ複合材料のクラックブリッジング挙動特性評価.
      山本剛, 白須圭一, 高木敏行, 橋田俊之
      日本機械学会論文集(A編),77(777),(2011),779-783 　
    5. Boron-Assisted Transformation to Rod-Like Graphitic Carbons from Multi-Walled Carbon Nanotubes in Boron-Mixed Multi-Walled Carbon Nanotube Solids.
      Yoshinori Sato, Hikaru Nishizaka, Kenichi Motomiya, Go Yamamoto, Akira Okubo, Hisamichi Kimura, Mikio Ishikuro, Kazuaki Wagatsuma, Toshiyuki Hashida, and Kazuyuki Tohji
      ACS Applied Materials & Interfaces,3,(2011),2431-2439
      10.1021/am200335n 　
    6. Investigation on CNT/alumina interface properties using molecular mechanics simulations.
      Sen Liu, Ning Hu, Go Yamamoto, Yindi Cai, Yajun Zhang, Yaolu Liu, Yuan Li, Toshiyuki Hashida, Hisao Fukunaga
      Carbon,49,(2011),3701-3704
      10.1016/j.carbon.2011.04.059 　

[2010]

    1. The influence of nanoscale defects on the fracture of multi-walled carbon nanotubes under tensile loading.
      Go Yamamoto, Ji Won Suk, Jinho An, Richard D. Piner, Toshiyuki Hashida, Toshiyuki Takagi, Rodney S. Ruoff
      Diamond & Related Materials,19,(2010),748-751
      10.1016/j.diamond.2010.01.045 　
    2. ナノ界面制御によるカーボンナノチューブ/アルミナ複合材料の作製とその機械的特性評価（機械的特性に及ぼす焼結助剤の影響評価）.
      山本剛, 大森守, 相沢養市, 橋田俊之, 高木敏行
      日本機械学会論文集(A編),76(764),(2010),416-418 　
    3. Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes.
      Go YAMAMOTO, Mamoru OMORI, Toshiyuki HASHIDA, Hisamichi KIMURA and Toshiyuki TAKAGI
      Journal of Solid Mechanics and Materials Engineering,4(3),(2010),460-469
      10.1299/jmmp.4.460 　
    4. Reinforcement of Alumina with Surface Modified Carbon Nanotubes.
      Go Yamamoto, Toshiyuki Hashida, Mamoru Omori and Hisamichi Kimura
      Materials Science Forum,631‒632,(2010),231-236 　
    5. Molecular mechanics simulation of the sliding behavior between nested walls in a multi-walled carbon nanotube.
      Yuan Li, Ning Hu, Go Yamamoto, Zhongchang Wang, Toshiyuki Hashida, Hiroshi Asanuma, Chensong Dong, Tomonaga Okabe, Masahiro Arai, Hisao Fukunaga
      Carbon,48,(2010),2934-2940
      10.1016/j.carbon.2010.04.031 　

[2009]

    1. Preparation and Microstructure of Carbon Nanotube-Toughened Alumina Composites.
      Go YAMAMOTO, Toshiyuki HASHIDA, Mamoru OMORI and Hisamichi KIMURA
      Journal of Solid Mechanics and Materials Engineering,3(2),(2009),85-95
      10.1299/jmmp.3.85 　
    2. Preparation and characterization of lanthanum carbide encapsulated carbon nanocapsule/lanthanum hexaboride nanocomposites.
      Masaru Namura, Ippei Waki, Yoshinori Sato, Go Yamamoto, Akira Okubo, Hisamichi Kimura, Naohisa Osaka, Kenichi Motomiya, Toshiyuki Hashida, Balachandran Jeyadevan, Kazuyuki Tohji
      Materials Letters,63,(2009),1307-1310
      10.1016/j.matlet.2009.03.006 　

[2008]

    1. A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties.
      G Yamamoto, M Omori, T Hashida and H Kimura
      Nanotechnology,19,(2008),315708 (7pp)-
      10.1088/0957-4484/19/31/315708 　
    2. Structural characterization and frictional properties of carbon nanotube/alumina composites prepared by precursor method.
      Go Yamamoto, Mamoru Omori, Kenji Yokomizo, Toshiyuki Hashida, Koshi Adachi
      Materials Science and Engineering B,148,(2008),265-269
      10.1016/j.mseb.2007.09.013 　
    3. Preparation of Carbon Nanotube - Toughened Alumina Composites.
      G. Yamamoto, M. Omori, and T. Hashida
      AIP Conference Proceedings, 5th International Workshop on Water Dynamics,987,(2008),83-85 　
    4. Novel Selective Dyeing Method for Chrysotile Asbestos Detection in Concrete Materials.
      YOSHIHIKO OKE, NAKAMICHI YAMASAKI, GO YAMAMOTO, KAZUHIRO SASAKI, NAOMI MAETA, HIROKAZU FUJIMAKI, AND TOSHIYUKI HASHIDA
      Environmental Science & Technology,42(5),(2008),1638-1642
      10.1021/es071805a 　
    5. Super-Robust, Lightweight, Conducting Carbon Nanotube Blocks Cross-Linked by De-fluorination.
      Yoshinori Sato, Makoto Ootsubo, Go Yamamoto, Gregory Van Lier, Mauricio Terrones, Shinji Hashiguchi, Hisamichi Kimura, Akira Okubo, Kenichi Motomiya, Balachandran Jeyadevan, Toshiyuki Hashida, and Kazuyuki Tohji
      ACS NANO,2(2),(2008),348-356
      10.1021/nn700324z 　
    6. Effect of fabrication process on electrical properties of polymer/multi-wall carbon nanotube nanocomposites.
      Ning Hu, Zen Masuda, Go Yamamoto, Hisao Fukunaga, Toshiyuki Hashida, Jinghao Qiu
      Composites: Part A,39,(2008),893-903
      10.1016/j.compositesa.2008.01.002 　
    7. The electrical properties of polymer nanocomposites with carbon nanotube fillers.
      Ning Hu, Zen Masuda, Cheng Yan, Go Yamamoto, Hisao Fukunaga and Toshiyuki Hashida
      Nanotechnology,19,(2008),215701 (10pp)-
      10.1088/0957-4484/19/21/215701 　
    8. Tribological Properties of Single-Walled Carbon Nanotube Solids.
      Go Yamamoto, Toshiyuki Hashida, Koshi Adachi, and Toshiyuki Takagi
      Journal of Nanoscience and Nanotechnology,8(5),(2008),2665-2670
      10.1166/jnn.2008.295 　
    9. Mechanical properties and structural characterization of carbon nanotube/alumina composites prepared by precursor method.
      Go Yamamoto, Mamoru Omori, Kenji Yokomizo, Toshiyuki Hashida
      Diamond & Related Materials,17,(2008),1554-1557
      10.1016/j.diamond.2008.01.059

[2007]

    1. Polycarbosilane-derived SiC/single-walled carbon nanotube nanocomposites.
      Go Yamamoto, Kenji Yokomizo, Mamoru Omori, Yoshinori Sato, Balachandran Jeyadevan, Kenichi Motomiya, Toshiyuki Hashida, Toru Takahashi, Akira Okubo and Kazuyuki Tohji
      Nanotechnology,18,(2007),145614 (5pp)-
      10.1088/0957-4484/18/14/145614
    2. Estimation of the Number of Cross-Links of Multi-walled Carbon Nanotube Films Formed by a Dehydration Condensation Reaction.
      S. Ogino, Y. Sato, G. Yamamoto, K. Sasamori, H. Kimura, T. Hashida, K. Motomiya, B. Jeyadevan, and K. Tohji
      AIP Conference Proceedings, 4th International Workshop on Water Dynamics,898,(2007),175-178 　
    3. Tribological and Strength Properties of Alumina/Multi-Walled Carbon Nanotube Composites.
      G. Yamamoto, K. Yokomizo, M. Omori, Y. Aizawa, and T. Hashida
      AIP Conference Proceedings, 4th International Workshop on Water Dynamics,898,(2007),154-158 　
    4. Evaluation of Tribological Properties of Binder-Free Single-Walled Carbon Nanotube Solids for Solid Lubrication Applications.
      G. Yamamoto, T. Hashida, K. Adachi, Y. Sato, and K. Tohji
      AIP Conference Proceedings, 4th International Workshop on Water Dynamics,898,(2007),130-134 　
    5. Mechanical Properties of Single-Walled Carbon Nanotube Solids Prepared by Spark Plasma Sintering.
      Go YAMAMOTO, Yoshinori SATO, Toru TAKAHASHI, Mamoru OMORI, Kazuyuki TOHJI and Toshiyuki HASHIDA
      Journal of Solid Mechanics and Materials Engineering,1(7),(2007),854-863
      10.1299/jmmp.1.854

[2006]

    1. Single-walled carbon nanotube-derived novel structural material.
      Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Toshiyuki Hashida, Akira Okubo, Kazuyuki Tohji
      Journal of Materials Research,21(6),(2006),1537-1542
      10.1557/JMR.2006.0186 　
    2. Synthesis and Characterization of Single-Walled Carbon Nanotube/Silicon Carbide Nanocomposites.
      G. Yamamoto, K. Yokomizo, M. Omori, Y. Sato, T. Takahashi, T. Hashida, K. Motomiya, A. Okubo, S. Watanabe, and K. Tohji
      AIP Conference Proceedings, 3rd International Workshop on Water Dynamics,833,(2006),94-99
    3. Route to the Synthesis of Binder-Free SWCNT Solids with Enhanced Mechanical Properties.
      G. Yamamoto, Y. Sato, M. Omori, K. Yokomizo, T. Hashida, T. Takahashi, A. Okubo, S. Watanabe, and K. Tohji
      AIP Conference Proceedings, The Second International Conference on Flow Dynamics,832,(2006),425-429 　
    4. Relation of the Number of Cross-Links and Mechanical Properties of Multi-Walled Carbon Nanotube Films Formed by a Dehydration Condensation Reaction.
      Shin-ichi Ogino, Yoshinori Sato, Go Yamamoto, Kenichiro Sasamori, Hisamichi Kimura, Toshiyuki Hashida, Kenichi Motomiya, Balachandran Jeyadevan, and Kazuyuki Tohji
      Journal of Physical Chemistry B,110(46),(2006),23159-23163
      10.1021/jp0642387 　
    5. Mechanical properties of binder-free single-walled carbon nanotube solids.
      Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Akira Okubo, Kazuyuki Tohji, Toshiyuki Hashida
      Scripta Materialia,54,(2006),299-303
      10.1016/j.scriptamat.2005.03.053 　

[2005]

    1. 三点曲げ試験法による単層カーボンナノチューブ固化体の機械的特性評価.
      山本剛, 佐藤義倫, 高橋亨, 大森守, 大久保昭, 田路和幸, 橋田俊之
      傾斜機能材料論文集,17,(2005),31-36
    2. カーボンナノチューブ固化体の作製と機械的特性の評価.
      山本剛, 大坪誠, 佐藤義倫, 高橋亨, 大森守, 大久保昭, 田路和幸, 橋田俊之
      傾斜機能材料論文集,17,(2005),25-30 　
    3. Preparation of Single-Walled Carbon Nanotube Solids and Their Mechanical Properties.
      G. YAMAMOTO, Y. SATO, T. TAKAHASHI, M. OMORI, T. HASHIDA, A. OKUBO, S. WATANABE, and K. TOHJI
      Extended Abstracts of International Symposium on EcoTopia Science 2005 (ISETS05),(2005),265-268
    4. 単層および多層カーボンナノチューブ固化体の作製と機械的特性評価.
      山本剛, 佐藤義倫, 大坪誠, 高橋亨, 大森守, 大久保昭, 田路和幸, 橋田俊之
      粉体および粉末冶金,52(11),(2005),831-835 　
    5. 放電プラズマ焼結法により作製した単層カーボンナノチューブ固化体の機械的特性評価.
      山本剛, 佐藤義倫, 高橋亨, 大森守, 大久保昭, 田路和幸, 橋田俊之
      粉体および粉末冶金,52(11),(2005),826-830 　
    6. 放電プラズマ焼結法により作製した単層カーボンナノチューブバルク固化体の機械的特性.
      山本剛, 佐藤義倫, 高橋亨, 大森守, 田路和幸, 橋田俊之
      日本機械学会論文集(A編),71(702),(2005),330-337 　
    7. Effects of Polycarbosilane Addition on the Mechanical Properties of Single-Walled Carbon Nanotube Solids.
      Go YAMAMOTO, Mamoru OMORI, Yoshinori SATO, Toru TAKAHASHI, Kazuyuki TOHJI and Toshiyuki HASHIDA
      JSME International Journal Series A,48(4),(2005),189-193
      10.1299/jsmea.48.189 　
    8. Preparation of single-walled carbon nanotube solids and their mechanical properties.
      Go Yamamoto, Yoshinori Sato, Toru Takahashi, Mamoru Omori, Toshiyuki Hashida, Akira Okubo, Sadao Watanabe, Kazuyuki Tohji
      Journal of Materials Research,20(10),(2005),2609-2612
      10.1557/JMR.2005.0345 　

[2004]

    1. PREPARATION AND BIOCOMPATIBILITY OF SINTERED CARBON NANOTUBE DISK.
      M. Ohtsubo, Y. Sato, B. Jeyadevan, K. Tohji, R. Hatakeyama, G. Yamamoto, M. Ohmori, T. Hashida, K. Tamura, T. Akasaka, M. Uo, A. Yokoyama, and F. Watari
      Proceedings of the International Symposium on Fullerenes, Nanotubes, and Carbon Nanoclusters, Fullerenes and nanotubes, materials for the new chemical frontier,(2004),243-248 　
    2. Biocompatibility of carbon nanotube disk.
      Yoshinori Sato, Makoto Ohtsubo, Balachandran Jeyadevan, Kazuyuki Tohji, Kenichi Motomiya, Rikizo Hatakeyama, Go Yamamoto, Mamoru Omori, Toshiyuki Hashida, Kazuchika Tamura, Tsukasa Akasaka, Motohiro Uo, Atsuro Yokoyama, Fumio Watari
      Proceedings of the International Society for Optical Engineering, Nanosensing: Materials and Devices,5593,(2004),623-627 　
    3. 単層カーボンナノチューブ焼結体の機械的特性に及ぼす不純物の影響.
      山本剛, 大坪誠, 佐藤義倫, 高橋亨, 大森守, 田路和幸, 橋田俊之
      傾斜機能材料論文集,16,(2004),157-162