Publication
- 2024年
- 2023年
- 2022年
- 2021年
- 2020年
- 2019年
- 2018年
- 2017年
- 2016年
- 2015年
- 2014年
- 2013年
- 2012年
- 2011年
- 2010年
- 2009年
- 2008年
- 2007年
- 2006年
- 2005年
- 2004年
- 2003年
- 2002年
- 2001年
- 2000年
- 1999年
- 1998年
213. | Yoshiaki Kawagoe, Yuuki Kinugawa, Keigo Matsumoto, Naoki Kishimoto, Takahiko Kawai and Tomonaga Okabe, "Effects of chain length of nonaromatic epoxy resins on thermomechanical and optical properties: Experiment, ab initio, and molecular dynamics simulations", Physical Chemistry Chemical Physics, Accepted. |
212. | Keiji Ogi, Shuji Yoshikawa, Tomonaga Okabe, and Sota Onodera,
"Prediction of viscoelastic effective creep compliances in cracked cross-ply composite laminates",
Mechanics of Materials 197 (2024) 105085.
https://doi.org/10.1016/j.mechmat.2024.105085 |
211. | Kaiwen Li, Gota Kikugawa, Yoshiaki Kawagoe, Yinbo Zhao, and Tomonaga Okabe,
"Determination of interaction parameters in a bottom-up approach employed in reactive dissipative particle dynamics simulation for thermosetting polymers",
Soft Matter, 2024, 20, 4591–4607.
https://doi.org/10.1039/D3SM01743E |
210. | Yuuki Kinugawa, Yoshiaki Kawagoe, Kota Oine, Kazuki Ryuzono, Yamato Hoshikawa, and Tomonaga Okabe,
"Experiment-free multiscale simulation of residual deformation in non-crimp fabric composites",
Advanced Composite Materials, 2024.
https://doi.org/10.1080/09243046.2024.2348861 |
209. | Yoshiko Nagumo, Miyu Hamanaka, Keiichi Shirasu, Kazuki Ryuzono, Akinori Yoshimura,
Hironori Tohmyoh and Tomonaga Okabe, "Fracture mechanism of carbon fiber-reinforced thermoplastic composite laminates under compression after impact",
Journal of Composite Materials 2024, Vol. 58(11) 1377–1390.
https://doi.org/10.1177/00219983241240622 |
208. | Yinbo Zhao, Gota Kikugawa, Keiichi Shirasu, Yoshiaki Kawagoe, Tomonaga Okabe,
"Constructing and characterizing various multi-component crosslinked epoxy resins based on molecular dynamics simulations with a curing reaction model",
Polymer 297 (2024) 126817.
https://doi.org/10.1016/j.polymer.2024.126817 |
207. | Tomohiro Miyata, Yohei K. Sato, Yoshiaki Kawagoe, Keiichi Shirasu, Hsiao-Fang Wang, Akemi Kumagai, Sora Kinoshita, Masashi Mizukami, Kaname Yoshida, Hsin-Hui Huang, Tomonaga Okabe, Katsumi Hagita, Teruyasu Mizoguchi, and Hiroshi Jinnai,
"Effect of Inorganic Material Surface Chemistry on Structures and Fracture Behaviours of Epoxy Resin",
Nature Communications (2024) 15:1898.
https://doi.org/10.1038/s41467-024-46138-6 |
206. | Yoshiaki Kawagoe, Gota Kikugawa, Keiichi Shirasu, Yuuki Kinugawa, Tomonaga Okabe,
"Dissipative particle dynamics simulation for reaction-induced phase separation of thermoset/thermoplastic blend",
The Journal of Physical Chemistry B 2024, 128, 2018−2027.
https://doi.org/10.1021/acs.jpcb.3c07756 |
205. | Yoshinori Tomiyoshi, Yutaka Oya, Toshihiro Kawakatsu and Tomonaga Okabe,
"Reaction-induced morphological transitions in a blend of diblock copolymers and reactive monomers: dissipative particle dynamics simulation",
Soft Matter, 2024, 20, 124–132.
https://doi.org/10.1039/d3sm00959a |
204. | Keiichi Shirasu, Yudai Yamaguchi, Yamato Hoshikawa, Gota Kikugawa, Hironori Tohmyoh and Tomonaga Okabe, "Micromechanics study of short carbon fiber-reinforced thermoplastics
fabricated via 3D printing using design of experiments", Materials Science & Engineering A 891 (2024) 145971.
https://doi.org/10.1016/j.msea.2023.145971 |
203. | Yingxiao Xi, Hironobu Fukuzawa, Shoji Fukunaga, Gota Kikugawa, Yinbo Zhao,
Yoshiaki Kawagoe, Tomonaga Okabe, Naoki Kishimoto, "Development of cat-GRRM/MC/MD method for the simulation of crosslinked
network structure formation with molecular autocatalysis", Journal of Molecular Catalysis, Volume 552, January 2024, 113680.
https://doi.org/10.1016/j.mcat.2023.113680 |
202. | Tomohiro Miyata, Hsiao-Fang Wang, Daisuke Watanabe, Yoshiaki Kawagoe, Tomonaga Okabe, Hiroshi Jinnai, "In-Situ Shearing Process Observation System for Soft Materials via Transmission Electron Microscopy ", Microscopy, 2023, 00(00), 1-7.
https://doi.org/10.1093/jmicro/dfad045 |
201. | Tadashi Watanabe, Yoshiaki Kawagoe, Keiichi Shirasu, and Tomonaga Okabe, "Multiscale model for failure prediction of carbon-fiber-reinforced composites under off-axis load", International Journal of Solids and Structures 283 (2023) 112489.
https://doi.org/10.1016/j.ijsolstr.2023.112489 |
200. | Tomoki YAMAZAKI, Yoshiaki ABE and Tomonaga OKABE, "Long-term two-dimensional analysis of the flow field around a hovering flapping flat-plate wing", Journal of Fluid Science and Technology, Vol.18, No.2 (2023).
https://doi.org/10.1299/jfst.2023jfst0026 |
199. | Yamato Hoshikawa, Keiichi Shirasu, Ryo Higuchi, Yoshiaki Kawagoe, Hironori Tohmyoh,
Tomonaga Okabe, "Experimental and numerical investigation of the relationship between material defects and elastoplasticity behavior of 3D-printed carbon-fiber-reinforced thermoplastics under compressive loading", Composites Science and Technology 241 (2023) 110116.
https://doi.org/10.1016/j.compscitech.2023.110116 |
198. | Yoshiaki Kawagoe and Tomonaga Okabe, "Evaluations of atomic-resolution strain fields using molecular dynamics simulations combined with corrected smoothed particle hydrodynamics", Computational Materials Science 228 (2023) 112333.
https://doi.org/10.1016/j.commatsci.2023.112333 |
197. | Sota Onodera, Kazuki Ryuzono, Shigeki Yashiro, Tomonaga Okabe, "Three-Dimensional Analytical Model for Composite Laminate with Transverse Cracks by Assuming Parabolic Crack Opening Advanced Composite Materials", Advanced Composite Materials,Volume 32, 2023 - Issue 6.
https://doi.org/10.1080/09243046.2023.2167481 |
196. | 阿部圭晃,山﨑智基,伊達周吾,竹内稔,庄司伊織,大林茂,岡部朋永,
"複合材航空機主翼の静的空力弾性解析に向けた完全分離解法の提案",
日本複合材料学会誌,48,6(2022),246-257.
https://doi.org/10.6089/jscm.48.246 |
195. | 岸本直樹,和泉廣樹,坂本純平,岡部朋永,
"量子化学計算と分子反応シミュレーションを組み合わせたマルチスケールモデリングによる熱硬化性フェノール樹脂の評価と解析",
日本複合材料学会誌,48,6(2022),217-222.
https://doi.org/10.6089/jscm.48.217 |
194. | Yoshiaki Kawagoe, Ryohei Chino, Satori Tsuzuki, Eri Itoh, and Tomonaga Okabe, "Analyzing Stochastic Features in Airport Surface Traffic Flow Using Cellular Automaton: Tokyo International Airport", IEEE Access ( Volume: 10) 95344 - 95355.
https://doi.org/10.1109/ACCESS.2022.3204819 |
193. | Yinbo Zhao, Gota Kikugawa, Yoshiaki Kawagoe, Keiichi Shirasu, and Tomonaga Okabe, "Molecular-scale investigation on relationship between thermal conductivity and the structure of crosslinked epoxy resin", International Journal of Heat and Mass Transfer 198 (2022) 123429.
https://doi.org/10.1016/j.ijheatmasstransfer.2022.123429 |
192. | 樋口諒, 青木涼馬, 横関智弘, 長嶋利夫, 岡部朋永, “非線形拡張有限要素法による複合材料の有孔強度評価“, 日本複合材料学会誌,48,6(2022),223-235.
https://doi.org/10.6089/jscm.48.223 |
191. | Tomohiro Miyata, Yoshiaki Kawagoe, Tomonaga Okabe, and Hiroshi Jinnai,
"Morphologies of adsorbed polymer chains on inorganic nanoparticles in a polymer composite as revealed via atomic-resolution electron microscopy",
Polymer Journal (2022) 54:1297–1306.
https://doi.org/10.1038/s41428-022-00690-4 |
190. | Yamato Hoshikawa, Keiichi Shirasu, Kohei Yamamoto, Yasuhisa Hirata, Ryo Higuchi and Tomonaga Okabe,
"Open-hole tensile properties of 3D-printed continuous carbon-fiber-reinforced thermoplastic laminates: Experimental study and multiscale analysis",
Journal of Thermoplastic Composite Materials, Volume 36, Issue 7, July 2023, Pages 2836-2861.
https://doi.org/10.1177/08927057221110791 |
189. | 干川大和,白須圭一,岡部朋永,
"3D造形した連続繊維熱可塑性CFRPの圧縮特性に関する実験的評価",
日本複合材料学会誌,48,4(2022),142-148.
https://doi.org/10.6089/jscm.48.142 |
188. | 川越吉晃,小森翔平,菊川豪太,白須圭ー,岡部朋永,
"シアネート硬化工ポキシ樹脂の熱機械特性に関する実験的評価と分子動力学シミュレーション",
日本複合材料学会誌, 48, 4, (2022), 134-141.
https://doi.org/10.6089/jscm.48.134 |
187. | Huachao Deng, Yoshiaki Kawagoe, Yoshiaki Abe, Kenjiro Terada, Tomonga Okabe,
"Generalized coordinate smoothed particle hydrodynamics with an overset method in total Lagrangian formulation",
International Journal for Numerical Methods in Engineering, 2022;123:4518–4544.
https://doi.org/10.1002/nme.7043 |
186. | Huachao Deng, Bo Yan, Tomonaga Okabea,
"Fatigue crack propagation simulation method using XFEM with variable-node element",
Engineering Fracture Mechanics 269 (2022) 10.
https://doi.org/10.1016/j.engfracmech.2022.108533 |
185. | Yoshiaki Kawagoe, Kenji Kawai, Yuta Kumagai, Keiichi Shirasu, Gota Kikugawa, Tomonaga Okabe,
"Multiscale modeling of process-induced residual deformation on carbon-fiber-reinforced plastic laminate from quantum calculation to laminate scale finite-element analysis",
Mechanics of Materials 170 (2022) 104332.
https://doi.org/10.1016/j.mechmat.2022.104332 |
184. | Keiichi Shirasu, Masayoshi Mizutani, Naoki Takano, Hajime Yoshinaga, Tsuyoshi Oguri, Ken-ichi Ogawa, Tomonaga Okabe and Shigeru Obayashi,
"Lap-shear strength and fracture behavior of CFRP/3D-printed titanium alloy adhesive joint prepared by hot-press-aided co-bonding",
International Journal of Adhesion and Adhesives, 117 (2022) 103169.
https://doi.org/10.1016/j.ijadhadh.2022.103169 |
183. | Shugo Date, Yoshiaki Abe, and Tomonaga Okabe,
"Effects of Fiber Properties on Aerodynamic Performance and Structural Sizing of Composite Aircraft Wings",
Aerospace Science and Technology 124 (2022) 107565.
https://doi.org/10.1016/j.ast.2022.107565 |
182. | Keiichi Shirasu, Junpei Tsuyuki, Ryo Higuchi, Sota Onodera and Tomonaga Okabe,
"Experimental and numerical study on open-hole tension/compression properties of carbon-fiber-reinforced thermoplastic laminates",
Journal of Composite Materials, 56(14) (2022) 2211-2225.
https://doi.org/10.1177/00219983221096880 |
181. | Kohei Yamamoto, Jose Victorio Salazar Luces, Keiichi Shirasu, Yamato Hoshikawa, Tomonaga Okabe, Yasuhisa Hirata,
"A novel single-stroke path planning algorithm for 3D printers using continuous carbon fiber reinforced thermoplastics", Additive Manufacturing 55 (2022) 102816.
https://doi.org/10.1016/j.addma.2022.102816 |
180. | Huachao Deng, Bo Yan, Tomonaga Okabe,
"A new path-independent interaction integral for dynamic stress intensity factors of cracked structures",
International Journal of Solids and Structures 243 (2022) 111559.
https://doi.org/10.1016/j.ijsolstr.2022.111559 |
179. | Yinbo Zhao, Gota Kikugawa,Yoshiaki Kawagoe, Keiichi Shirasu, Naoki Kishimoto, Yingxiao Xi,and Tomonaga Okabe,
"Uncovering the Mechanism of Size Effect on the Thermomechanical Properties of Highly Cross-Linked Epoxy Resins",
The Journal of Physical Chemistry B 2022, 126, 2593−2607
https://doi.org/10.1016/j.ijsolstr.2022.111518 |
178. | Y. Nagumo, S. Onodera, T. Okabe, "Prediction of Transverse Crack Progression Based on Continuum Damage
Mechanics and its Application to Composite Laminates and Filament-Wound Cylindrical Pressure Vessels ",
Advanced Composite Materials, 31, 6 (2022), 600-616
https://doi.org/10.1080/09243046.2022.2048452 |
177. | Ryo Higuchi, Ryoma Aoki; Sota Onodera, Xin Lu, Jie Zhi, Karh Heng Leong; Tomohiro Yokozeki, Tomonaga Okabe, Tong Earn Tay,
"Multi-fidelity progressive damage simulation of notched composite laminates with various ply thicknesses",
International Journal of Solids and Structures 242 (2022) 111518.
https://doi.org/10.1016/j.ijsolstr.2022.111518 |
176. | Yutaka Oya, Gota Kikugawa, Tomonaga Okabe and Toshihiro Kawakatsu,
"Density functional theory for polymer phase separations induced by coupling of chemical reaction and elastic stress",
Advanced Theory and Simulations 2021, 2100385.
https://doi.org/10.1002/adts.202100385 |
175. | Takeki Yamamoto, Tomonaga Okabe, Kenjiro Terada,
"Numerical simulation for deformation of laminates combining the novel shell element with the decoupled two-scale viscoelastic analysis of FRP",
International Journal of Solids and Structures 234-235 (2022) 111236
https://doi.org/10.1016/j.ijsolstr.2021.111236 |
174. | Yoshiaki Kawagoe, Gota Kikugawa, Keiichi Shirasu, and Tomonaga Okabe, "Thermoset resin curing simulation using quantum chemical reaction path calculation and dissipative particle dynamics",
Soft Matter 17 (2021) 6707–6717.
https://doi.org/10.1039/D1SM00600B |
173. | Sota Onodera, Junpei Tsuyuki, Tomonaga Okabe, "Micromechanical modeling for the in-plane mechanical behavior of orthogonal
3D woven ceramic matrix composites with transverse and matrix cracking",
International Journal of Damage Mechanics 0(0) 1–25.
https://doi.org/10.1177/10567895211026017 |
172. | R. Higuchi, S. Warabi, A. Yoshimura, T. Nagashima, T. Yokozeki, T. Okabe,
"Experimental and numerical study on progressive damage and failure in composite laminates during open-hole compression tests",
Composites: Part A 145 (2021) 106300.
https://doi.org/10.1016/j.compositesa.2021.106300 |
171. | Nobuyuki Odagiri, Keiichi Shirasu, Yoshiaki Kawagoe, Gota Kikugawa, Yutaka Oya, Naoki Kishimoto, Fumio S. Ohuchi, Tomonaga Okabe,
"Amine/epoxy stoichiometric ratio dependence of crosslinked structure and ductility in amine-cured epoxy thermosetting resins", Journal of Applied Polymer Science 138(23):50542.
https://doi.org/10.1002/app.50542 |
170. | Risa Saito, Yosuke Yamanaka, Seishiro Matsubara, Tomonaga Okabe, Shuji Moriguchi, Kenjiro Terada,
" A decoupling scheme for two-scale finite thermoviscoelasticity with thermal and cure-induced deformations",
International Journal for Numerical Methods in Engineering, 122, (2021) 1133–1166
https://doi.org/10.1002/nme.6575 |
169. | Yutaka Oya, Masahiro Nakazawa, Keiichi Shirasu, Yuki Hino, Inuyama Kyosuke, Gota Kikugawa, Jing Li, Riichi Kuwahara, Naoki Kishimoto, Hiroki Waizumi,
Masaaki Nishikawa, Anthony Waas, Nobuyuki Odagiri, Andrew Koyanagi, Marco Salviato, Tomonaga Okabe, " Molecular dynamics simulation of cross-linking processes and material properties for epoxy resins using first-principle calculation combined with global reaction route mapping algorithms", Chemical Physics Letters 762 (2021) 138104 https://doi.org/10.1016/j.cplett.2020.138104 |
168. | Go Yamamoto,Keita Koizumi,Takahiro Nakamura,Noriyuki Hirano,Tomonaga Okabe,
"Tensile-Strength-Controlling Factors in Unidirectional Carbon Fiber Reinforced Plastic Composites",
Composites: Part A 140 (2021) 106140
https://doi.org/10.1016/j.compositesa.2020.106140 |
167. | Shugo DATE, Yoshiaki ABE, Takeki YAMAMOTO and Tomonaga OKABE,
"Fluid-structural Design Analysis for Composite Aircraft Wings with Various Fiber Properties",
Journal of Fluid Science and Technology Vol.16, No.1, 2021
https://doi.org/10.1299/jfst.2021jfst0009 |
166. | 樋口諒,青木涼馬,横関智弘,岡部朋永,
"ミクロスケール解析による薄層CFRP 積層板のin-situ損傷・強度特性評価",
日本複合材料学会誌,46,5(2020),212-222 https://doi.org/10.6089/jscm.46.212 ※本論文は「2021年6月 日本複合材料会 論文賞」を受賞しました |
165. | Sota Onodera, Tomonaga Okabe,
"Analytical model for determining effective stiffness and mechanical behavior of polymer matrix composite laminates using continuum damage mechanics",
International Journal of Damage Mechanics 2020, Vol. 29(10) 1512–1542
https://doi.org/10.1177/1056789520939624 |
164. | R. Higuchi, S. Warabi, W. Ishibashi, T. Okabe,
"Experimental and numerical investigations on push-out delamination in drilling of composite laminates",
Composites Science and Technology 198 (2020) 108238
https://doi.org/10.1016/j.compscitech.2020.108238 |
163. | Yue Huang, Jingtian Zhang, Edwin S. Jiang, Yutaka Oya, Akinori Saeki, Gota Kikugawa, Tomonaga Okabe, and Fumio S. Ohuchi,
"Structure-Property Correlation Study for Organic Photovoltaic Polymer Materials Using Data Science Approach",
J. Phys. Chem. C 2020, 124, 12871−12882 https://doi.org/10.1021/acs.jpcc.0c00517 |
162. | R. Higuchi, R. Aoki, T. Yokozeki and T. Okabe,
"Evaluation of the in-situ damage and strength properties of thin-ply CFRP laminates by micro-scale finite element analysis ",
Advanced Composite Materials, 29, 5 (2020), 475-493
https://doi.org/10.1080/09243046.2020.1740867 |
161. | Yoshiaki Abe, Takayuki Konishi, Tomonaga Okabe,
"Numerical Simulation of Wake Deflection Control around NACA0012 Airfoil Using Active Morphing Flaps ",
Journal of Flow Control, Measurement & Visualization, 2020, 8, 121-133
https://doi.org/10.4236/jfcmv.2020.83007 |
160. | Yuta Kumagai, Sota Onodera, Marco Salviato, Tomonaga Okabe,
"Multiscale analysis and experimental validation of crack initiation in quasi-isotropic laminates",
International Journal of Solids and Structures 193–194 (2020) 172–191
https://doi.org/10.1016/j.ijsolstr.2020.02.010 |
159. | 矢代茂樹,伊藤晃,松宮飛翔,辻孝鴻,大矢豊大,松崎亮介,岡部朋永,
"複合材構造のCompression RTM成形における樹脂含浸時間予測",
日本複合材料学会誌,46,3(2020),92-97
https://doi.org/10.6089/jscm.46.92 |
158. | Yutaka Oya, Tsubasa Matsumiya, Akira Ito, Ryosuke Matsuzaki and Tomonaga Okabe,
"Gate optimization for resin transfer molding in dual-scale porous media: Numerical simulation and experiment measurement",
Journal of Composite Materials 2020, Vol. 54(16) 2131–2145
https://doi.org/10.1177/0021998319890122 |
157. | Jimin Qian, Nam Phuong Nguyen, Yutaka Oya, Gota Kikugawa, Tomonaga Okabe, Yue Huang and Fumio S. Ohuchi,
"Introducing self-organized maps (SOM) as a visualization tool for materials research and education",
Results in Materials 4 (2019) 100020 https://doi.org/10.1016/j.rinma.2019.100020 |
156. | Sota Onodera, Tomonaga Okabe,
"Three-dimensional analytical model for effective elastic constants of transversely isotropic plates with multiple cracks: application to stiffness reduction and steady-state cracking of composite laminates",
Engineering Fracture Mechanics 219 (2019) 106595 https://doi.org/10.1016/j.engfracmech.2019.106595 |
155. | Gota Kikugawa, Yuta Nishimura, Koji Shimoyama, Taku Ohara, Tomonaga Okabe, Fumio S. Ohuchi,
"Data analysis of multi-dimensional thermophysical properties of liquid substances based on clustering approach of machine learning",
Chemical Physics Letters 728, (2019), 109-114 https://doi.org/10.1016/j.cplett.2019.04.075 |
154. | Go Yamamoto, Miho Onodera, Keita Koizumi, Jun Watanabe, Haruki Okuda, Fumihiko Tanaka, Tomonaga Okabe,
"Considering the stress concentration of fiber surfaces in the prediction of the tensile strength of unidirectional carbon fiber-reinforced plastic composites",
Composites Part A 121 (2019) 499–509 https://doi.org/10.1016/j.compositesa.2019.04.011 |
153. | Shigeki Yashiro, Daichi Nakashima, Yutaka Oya, Tomonaga Okabe, Ryosuke Matsuzaki,
"Particle simulation of dual-scale flow in resin transfer molding for process analysis",
Composites Part A 121 (2019) 283–288 https://doi.org/10.1016/j.compositesa.2019.03.038 |
152. | Ryosuke Matsuzaki, Tomohiro Ishikawa, Tomonaga Okabe, Yutaka Oya and Shigeki Yashiro,
"Stiffness and permeability multi-objective optimization of carbon-fiber-reinforced plastic mesostructures using homogenization method",
Journal of Composite Materials 2019, Vol. 53(13) 1865–1880
https://doi.org/10.1177/0021998318812160 |
151. | Jing li, Sakamoto Jumpei, Hiroki Waizumi, Yutaka Oya, Yue Huang, Naoki Kishimoto, Tomonaga Okabe,
"A multiscale model for the synthesis of thermosetting resins: From the addition reaction to cross-linked network formation",
Chemical Physics Letters 720 (2019) 64–69 https://doi.org/10.1016/j.cplett.2019.02.012 |
150. | Go Yamamoto and Tomonaga Okabe,
"Numerical study for tensile strength prediction of unidirectional carbon fiber-reinforced composite considering fiber surface stress concentration",
Mechanical Engineering Journal, 6, (2019) 19-00020.
https://doi.org/10.1299/mej.19-00020 |
149. | J. Watanabe, F. Tanaka, R. Higuchi, H. Matsutani, H. Okuda and T.Okabe,
"A study of stress concentrations around fiber breaks in unidirectional CF/epoxy composites using double-fiber fragmentation tests",
Advanced Composite Materials, 1-13
https://doi.org/10.1080/09243046.2017.1416567 |
148. | Yutaka OYA, Kyosuke Inuyama, Tomonaga Okabe, Jun Koyanagi & Ryosuke Matsuzaki ,
"Analysis of structure characteristics in laminated graphene oxide nanocomposites using molecular dynamics simulation",
Advanced Composite Materials, 2018, 1-12
https://doi.org/10.6089/jscm.42.76 |
147. | Tomonaga Okabe, Sota Onodera, Yuta Kumagai and Yoshiko Nagumo,
"Continuum damage mechanics modeling of composite laminates including transverse cracks",
International Journal of Damage Mechanics, 27, 6 (2018) 877-895
https://doi.org/10.1177/1056789517711238 |
146. | Haruki Okuda, Robert J. Young, Daniel Wolverson, Fumihiko Tanaka, Go Yamamoto, Tomonaga Okabe,
"Investigating nanostructures in carbon fibres using Raman spectroscopy", Carbon 130 (2018) 178-184
https://doi.org/10.1016/j.carbon.2017.12.108 |
145. | Go Yamamoto, Tomonaga Okabe, and Noriaki Ikenaga,
"Fracture behavior of diamondlike carbon films deposited on polymer substrates",
Journal of Vacuum Science & Technology A, 36, (2018), Article No. 02C101.
https://doi.org/10.1116/1.5003683 |
144. | 山本剛,坂本鎌治,岡部朋永,橋本雅弘,平野啓之, "円孔を有する不連続炭素繊維強化熱可塑性プラスチックの引張強度予測",日本複合材料学会誌,43,3(2017),104-111
https://doi.org/10.6089/jscm.43.104 |
143. | 井上良徳,表竜二,岡部朋永, "不完全界面接着を考慮した力学モデルの短繊維強化樹脂射出成形品による評価", 日本複合材料学会誌,43,3(2017),81-89
https://doi.org/10.6089/jscm.43.81 |
142. | Sota Onodera, Yoshiko Nagumo & Tomonaga Okabe, "Prediction for progression of transverse cracking in CFRP cross-ply laminates using
Monte Carlo method", Advanced Composite Materials, 26,2017-isuue 5, 477-491.
https://doi.org/10.6089/jscm.43.124 |
141. | 小野寺壮太,南雲佳子,岡部朋永, "モンテカルロ法によるCFRP直交積層板のトランスバースクラック進展解析",
日本複合材料学会誌,43,4(2017),124-132.
https://doi.org/10.6089/jscm.43.124 |
140. | R. Higuchi, T. Okabe, A. Yoshimura, T. E. Tay, "Progressive Failure under High-Velocity Impact on Composite Laminates;
Experiment and Phenomenological Mesomodeling", Engineering Fracture Mechanics 178 (2017), 346-361.
https://doi.org/10.1016/j.engfracmech.2017.03.019 |
139. | R. Higuchi, T. Okabe, T. Nagashima, "Numerical simulation of progressive damage and failure in composite laminates
using XFEM/CZM coupled approach", Composites: Part A 95 (2017) 197-207
https://doi.org/10.1016/j.compositesa.2016.12.026 |
138. | Yutaka Oya, Gota Kikugawa, Tomonaga Okabe, "Clustering Approach for Multidisciplinary Optimum Design of Cross-Linked Polymer",
Macromolecular Theory and Simulations, 26 (2017),1600072
, cover https://doi.org/10.1002/mats.201600072 |
137. | Yuta Kumagai, Sota Onodera, Yoshiko Nagumo, Tomonaga Okabe, Kenichi Yoshioka, "Multiscale modeling of free-surface effect on crack formation
inunidirectional off-axis laminates",
Composites: Part A 98 (2017) 136–146.
https://doi.org/10.1016/j.compositesa.2017.03.016 |
136. | Tomonaga Okabe, Yutaka Oya, Go Yamamoto, Junki Sato, Tsubasa Matsumiya, Ryosuke Matsuzaki, Shigeki Yashiro, Sigeru Obayashi, "Multi-objective optimization for resin transfer molding process", Composites: Part A 92 (2017) 1-9 |
135. | 井上良徳、井川泰爾、岡部朋永, "短繊維強化複合材料の等価剛性予測に対する不完全接着を考慮した力学モデルの評価", 日本複合材料学会誌,42,6(2016),220-227
https://doi.org/10.6089/jscm.42.220 |
134. | Haruki Okuda, Robert J. Young, Fumihiko Tanaka, Jun Watanabe, Tomonaga Okabe, "Tensile failure phenomena in carbon fibres",
Carbon 107 (2016) 474-481. https://doi.org/10.1016/j.carbon.2016.06.037 |
133. | 吉岡健一,Felix NGUYEN, Swezin THAN TUN, 山本剛, 岡部朋永, "CFRPの層間靱性に及ぼすCNT添加の影響評価に関する研究",日本複合材料学会誌, 42, 5(2016), 193-200
https://doi.org/10.6089/jscm.42.193 |
132. | Tomonaga Okabe, Yutaka Oya, Koichi Tanabe, Gota Kikugawa, Kenichi Yoshioka, "Molecular dynamics simulation of crosslinked epoxy resins:
Curing and mechanical properties", European Polymer Journal 80 (2016) 78–88.
https://doi.org/10.1016/j.eurpolymj.2016.04.019 |
131. | 吉岡健一,橋本雅弘,樋口諒,坂本鎌治,宮地岳彦,岡部朋永, “動的陽解法有限要素法を用いた有孔CFRP 積層板および織物材の引張破壊
シミュレーション”,日本複合材料学会誌, 42, 4(2016), 125-137
https://doi.org/10.6089/jscm.42.125 |
130. | 渡邉潤, 田中文彦, 樋口諒, 松谷浩明, 奥田治己, 岡部朋永,
“ダブルファイバーフラグメンテーション試験を用いた一方向CF/エポキシ複合材料の繊維破断部近傍における応力集中係数の検討”,
日本複合材料学会誌, 42, 3 (2016), 89-97.
https://doi.org/10.6089/jscm.42.89 |
129. | 大矢豊大, 犬山恭介, 岡部朋永, 小柳潤, 松崎亮介, "分子動力学法を用いた積層グラフェンの構造特性解析", 日本複合材料学会誌, 42, 2 (2016), 76-81.
https://doi.org/10.6089/jscm.42.76 |
128. | 竹内健都, 松崎亮介, 岡部朋永, 大矢豊大,“分子動力学法と応答曲面法による熱可塑性樹脂複合材料融着プロセスデザイン” ,日本複合材料学会誌, 42, 2 (2016), 67-75.
,
https://doi.org/10.6089/jscm.42.67 |
127. | 渡邉潤, 田中文彦, 松谷浩明, 奥田治己, 津田皓正, 樋口諒, 山本剛, 岡部朋永, “ばね要素モデルを用いた一方向炭素繊維/エポキシ複合材料の引張強度予測” ,
材料システム 第34巻(平成28年3月15日発行) 15-19.
https://doi.org/10.34401/zairyosystem.34.0_15 |
126. | 吉岡健一, 熊谷裕太, 樋口諒, Donyeon Lee, 岡部朋永, “一方向強化CFRP複合材の斜め方向引張試験における破断延性に関するマルチスケールモデリング”,
材料システム 第34巻(平成28年3月15日発行) 7-13.
https://doi.org/10.34401/zairyosystem.34.0_7 |
125. | R. Higuchi, T. Okabe, Y. Ohtake, T. Honda, Y. Ueda and S. Ogihara, "Numerical simulation of damage progression and fracture in structures made of 3D
woven ceramic matrix composites", Advanced Composite Materials, 25, 3, (2016), 209-227.
https://doi.org/10.1080/09243046.2015.1075672 |
124. | Masashi Ishikawa, Yasuo Kogo, Jun Koyanagi, Fumihiko Tanaka, Tomonaga, Okabe,
"Torsional modulus and internal friction of polyacrylonitrile- and pitch-based carbon fibers", J Mater Sci (2015) 50:7018–7025.
https://doi.org/10.1007/s10853-015-9254-z |
123. | Shigeki Yashiro and Tomonaga Okabe, "Smoothed particle hydrodynamics in a generalized coordinate system with a finite-deformation constitutive model",
Int. J. Numer. Meth. Engng 2015; 103:781–797.
https://doi.org/10.1002/nme.4906 |
122. | Tomonaga Okabe, Yuta Kumagai, Ryo Higuchi and Masaaki Nishikawa,
"Onset of Matrix Cracking in Fiber Reinforced Polymer Composites: A Historical Review and a Comparison Between Periodic Unit Cell Analysis and Analytic Failure Criteria", Advanced Structured Materials 64, H. Altenbach et al. (eds.), Springer International Publishing Switzerland, (2015), 299-317
https://doi.org/10.1007/978-3-319-19440-0_13 |
121. | T. Okabe, H. Imamura, Y. Sato, R. Higuchi, J. Koyanagi, R. Talreja, "Experimental and numerical studies of initial cracking in CFRP cross-ply
laminates", Composites: Part A 68 (2015) 81–89.
https://doi.org/10.1016/j.compositesa.2014.09.020 |
120. | 松谷浩明,武田一朗,橋本雅弘,平野啓之,岡部朋永,"粒子法を用いた熱可塑性スタンパブルシートの流動シミュレーション",日本複合材料学会誌, 40, 5 (2014), 227-237.
https://doi.org/10.6089/jscm.40.227 |
119. | Y. Satoa, T. Okabea, R. Higuchi and K. Yoshioka, "Multiscale approach to predict crack initiation in unidirectional off-axis laminates",
Advanced Composite Materials, 2014. Vol. 23, Nos. 5–6, 461–475
https://doi.org/10.1080/09243046.2014.915100 |
118. | J. Watanabe, F. Tanaka, H. Okuda and T. Okabe, "Tensile strength distribution of carbon fibers at short gauge lengths",
Advanced Composite Materials, 2014. Vol. 23, Nos. 5–6, 535–550.
https://doi.org/10.1080/09243046.2014.915120 |
117. | Fumihiko Tanaka, Tomonaga Okabe, Haruki Okuda Ian A. Kinloch Robert J. Young, "Factors controlling the strength of carbon fibers in tension",
Composites: Part A 57 (2014) 88–94.
https://doi.org/10.1016/j.compositesa.2013.11.007 |
116. | T. Okabe, "Recent studies on numerical modelling of damage progression in fibre-reinforced plastic composites",
Mechanical Engineering Reviews, Vol.2, No.1 (2015), 1-11.
https://doi.org/10.1299/mer.14-00226 |
115. | Fumihiko Tanaka, Daniel Wolverson, Tomonaga Okabe, Ian A. Kinloch and Robert J. Young,
"Investigation of the sp3 structure of carbon fibres using UV-Raman spectroscopy",
炭素 TANSO 2013[No.259] 1-5
https://doi.org/10.7209/tanso.2013.243 |
114. | Jun Koyanagi, Yukihiro Sato, Toshiki Sasayama, Tomonaga Okabe, Satoru Yoneyama, "Numerical simulation of strain-rate dependent transition of transverse tensile
failure mode in fiber-reinforced composites", Composites: Part A 56 (2014) 136–142.
https://doi.org/10.1016/j.compositesa.2013.10.002 |
113. | Tomonaga Okabe, Toshiki Sasayama, Jun Koyanagi,
"Micromechanical simulation of tensile failure of discontinuous fiber-reinforced polymer matrix composites using Spring Element Model",
Composites: Part A 56 (2014) 64-71.
https://doi.org/10.1016/j.compositesa.2013.09.012 |
112. | Toshiki Sasayama, Tomonaga Okabe, Yoshiteru Aoyagi, Masaaki Nishikawa,
"Prediction of failure properties of injection-molded short glass fiber-reinforced polyamide 6,6", Composites: Part A 52 (2013) 45-54.
https://doi.org/10.1016/j.compositesa.2013.05.004 |
111. | Tomonaga Okabe, Tomohiro Takehara, Keisuke Inose, Noriyuki Hirano, Masaaki Nishikawa, Takuya Uehara,
"Curing reaction of epoxy resin composed of mixed base resin and curing agent: Experiments and molecular simulation",
Polymer 54 (2013) 4660-4668.
https://doi.org/10.1016/j.polymer.2013.06.026 |
110. | Fumihiko Tanaka, Tomonaga Okabe, Haruki Okuda, Ian A. Kinloch, Robert J. Young,
"The effect of nanostructure upon the compressive strength of carbon fibres", J Mater Sci (2013) 48:2104–2110.
https://doi.org/10.1007/s10853-012-6984-z |
109. | Fumihiko Tanaka, Tomonaga Okabe, Haruki Okuda, Masafumi Ise, Ian A. Kinloch, Tsutomu Mori, Robert J. Young,
"The effect of nanostructure upon the deformation micromechanics of carbon fibres.", Carbon 52 (2013) 372-378.
https://doi.org/10.1016/j.carbon.2012.09.047 |
108. | M. Hashimoto, T. Okabe, T. Sasayama, H. Matsutani, M. Nishikawa,
"Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution",
Composites: Part A 43 (2012) 1791-1799.
https://doi.org/10.1016/j.compositesa.2012.05.006 |
107. | Tomonaga Okabe, Hiroaki Matsutani, Takashi Honda, Shigeki Yashiro,
"Numerical simulation of microscopic flow in a fiber bundle using the moving particle semi-implicit method",
Composites: Part A 43 (2012) 1765-1774.
https://doi.org/10.1016/j.compositesa.2012.05.003 |
106. | S. C. Chowdhury, B. Z. (Gama) Haque, T. Okabe, J. W. Gillespie Jr,
"Modeling the effect of statistical variations in length and diameter of randomly oriented CNTs on the properties of CNT reinforced nanocomposites",
Composites: Part B 43 (2012) 1756-1762.
https://doi.org/10.1016/j.compositesb.2012.01.066 |
105. | T. Okabe, T. Motani, M. Nishikawa and M. Hashimoto, "Numerical simulation of microscopic damage and strength of fiber-reinforced plastic composites",
Advanced Composite Materials Volume 21, 2012 - Issue 2 147-163.
https://doi.org/10.1080/09243046.2012.688495 |
104. | T. Okabe, S. Yashiro, "Damage detection in holed composite laminates using an embedded FBG sensor", Composites: Part A 43 (2012) 388-397.
https://doi.org/10.1016/j.compositesa.2011.12.009 |
103. | 小柳潤, 米山聡, 岡部朋永, "有孔CFRP積層板のクリープ負荷後残存強度", 実験力学 Vol.12, No.2 pp.81-87.(2012年6月)
https://doi.org/10.11395/jjsem.12.81 |
102. | Abreeza MANAP, Kazuhiro OGAWA and Tomonaga OKABE,"Numerical Analysis of Interfacial Bonding of Al-Si Particle and Mild Steel Substrate by Cold
Spray Technique Using the SPH Method", Journal of Solid Mechanics and Materials Engineering Vol. 6, No. 3, 2012, 241-250
https://doi.org/10.1299/jmmp.6.241 |
101. | S. Yashiro, T. Okabe, "Estimation of fatigue damage in holed composite laminates using an embedded FBG sensor", Composites: Part A 42 (2011) 1962-1969.
https://doi.org/10.1016/j.compositesa.2011.08.021 |
100. | T. Okabe, M. Nishikawa, H. Toyoshima, "A periodic unit-cell simulation of fiber arrangement dependence on the transverse tensile
failure in unidirectional carbon fiber reinforced composites", International Journal of Solids and Structures 48 (2011) 2948-2959.
https://doi.org/10.1016/j.ijsolstr.2011.06.012 |
99. | 駒形大輔, 岡部朋永, 矢代茂樹, 吉村彰記, 小笠原俊夫, "柔軟体衝突を受けるCFRP積層板の損傷解析", 日本複合材料学会誌, 37, 5 (2011), 164-171.
https://doi.org/10.6089/jscm.37.164 |
98. | 橋本雅弘, 岡部朋永, 西川雅章, "単糸分散炭素繊維による熱可塑性プレス基材の開発とその力学特性評価",
日本複合材料学会誌, 37, 4, (2011), 138-146.
https://doi.org/10.6089/jscm.37.138 |
97. | I. Taketa, T. Okabe, H. Matsutani and A. Kitano, "Flowability of unidirectionally arrayed chopped strands in compression molding",
Composites: Part B 42 (2011) 1764-1769.
https://doi.org/10.1016/j.compositesb.2011.01.021 |
96. | Akinori Yoshimura and Tomonaga Okabe, "Damage Growth Analysis in Particle-Reinforced Composite Using Cohesive Element",
Advanced Composite Materials 20 (2011) 569-583.
https://doi.org/10.1163/156855111X610406 |
95. | S. Yashiro, T. Okabe, K. Matsushima, "A Numerical Approach for Injection Molding of Short-Fiber-Reinforced Plastics Using a Particle Method",
Advanced Composite Materials 20 (2011) 503-517.
https://doi.org/10.1163/092430411X584423 |
94. | I. Taketa, N. Sato, A. Kitano, M. Nishikawa, T. Okabe, "Enhancement of strength and uniformity in unidirectionally arrayed chopped strands with angled slits",
Composites: Part A 41 (2010) 1639-1646.
https://doi.org/10.1016/j.compositesa.2010.07.010 |
93. | Yuan Li, Ning Hu, Go Yamamoto, Zhongchang Wang, Toshiyuki Hashida, Hiroshi Asanuma, Chensong Dong, Tomonaga Okabe, Masahiro Arai, Hisao Fukunaga,
"Molecular mechanics simulation of the sliding behavior between nested walls in a multi-walled carbon nanotube",
Carbon 48 (2010) 2934-2940.
https://doi.org/10.1016/j.carbon.2010.04.031 |
92. | 豊島広樹, 岡部朋永, 西川雅章, 橋本雅弘, "一方向CFRPにおける界面特性が破壊強度に与える影響に関する数値シミュレーション",
日本機械学会論文集(A編) 76巻 767号(2010-7), 876-883.
https://doi.org/10.1299/kikaia.76.876 |
91. | T. Okabe, M. Nishikawa, N. Takeda, "Micromechanics on the Rate-Dependent Fracture of Discontinuous Fiber-Reinforced Plastics",
International Journal of DAMAGE MECHANICS, Vol.19—April 2010, 339-360.
https://doi.org/10.1177/1056789509103649 |
90. | Keiji Ogi, Tomonaga Okabe, Manabu Takahashi, Shigeki Yashiro, Akinori Yoshimura, Toshio Ogasawara,
"Experimental characterization of high-speed impact damage behavior in a three-dimensionally woven SiC/SiC composite",
Composites: Part A 41 (2010) 489-498.
https://doi.org/10.1016/j.compositesa.2009.12.005 |
89. | M. Nishikawa and T. Okabe, "Microstructure-dependent fatigue damage process in short fiber reinforced plastics",
International Journal of Solids and Structures 47 (2010) 398-406.
https://doi.org/10.1016/j.ijsolstr.2009.10.002 |
88. | Sanjib Chandra Chowdhury, Tomonaga Okabe and Masaaki Nishikawa,
"Effects of Vacancy Defects on the Interfacial Shear Strength of Carbon Nanotube Reinforced Polymer Composite",
Journal of Nanoscience and Nanotechnology Vol. 10, 739-745, 2010.
https://doi.org/10.1166/jnn.2010.1879 |
87. | 矢代茂樹, 岡部朋永, 松島紀佐, "粒子法を用いた短繊維強化プラスチックの射出成形解析", 日本複合材料学会誌, 36, 1, (2010), 11-18.
https://doi.org/10.6089/jscm.36.11 |
86. | T. Yamaguchi, T. Okabe and T. Kousaka, "Fatigue Simulation for Ti/GFRP Laminates using Cohesive Elements",
Advanced Composite Materials 19 (2010) 107-122.
https://doi.org/10.1163/092430410X490428 |
85. | T. Okabe, K. Ishi, M. Nishikawa and N. Takeda, "Prediction of Tensile Strength of Unidirectional CFRP Composites",
Advanced Composite Materials 19 (2010) 229-241.
https://doi.org/10.1016/j.compstruct.2017.02.060 |
84. | T. Yamaguchi, T. Okabe, S. Yashiro, "Fatigue simulation for Titanium/CFRP hybrid laminates using cohesive elements",
Composites Science and Technology 69 (2009) 1968-1973.
https://doi.org/10.1016/j.compscitech.2009.04.020 |
83 | I. Taketa, T. Okabe, A. Kitano, "Strength improvement in unidirectional arrayed chopped strands with interlaminar toughening",
Composites: Part A 40 (2009) 1174-1178.
https://doi.org/10.1016/j.compositesa.2009.05.006 |
82. | 矢代茂樹, 岡部朋永, "結合力要素を用いた有孔CFRP積層板の疲労損傷進展解析",
日本機械学会論文集(A編) 75巻 751号 (2009-3) 310-315.
https://doi.org/10.1299/kikaia.75.310 |
81. | 岡部朋永, 矢代茂樹, "結合力要素を用いた切欠きを有するCFRPクロスプライ積層板の疲労損傷進展シミュレーション",
日本機械学会論文集(A編) 75巻 751号 (2009-3) 304-309.
https://doi.org/10.1299/kikaia.75.310 |
80. | 西川雅章, 岡部朋永, 武田展雄, "短繊維強化プラスチックの破壊モードに及ぼす材料微視構造の影響",
日本機械学会論文集(A編) 75巻 751号 (2009-3) 287-295.
https://doi.org/10.1299/kikaia.75.287 |
79. | 西川雅章, 岡部朋永, 武田展雄, "一方向不連続繊維CFRPの微視損傷形態と強度特性に関する周期セルシミュレーション",
日本複合材料学会誌, 35, 4 (2009),149-156.
https://doi.org/10.6089/jscm.35.149 |
78. | 山口拓真, 岡部朋永, 高坂達郎, "結合力要素を用いたTi/GFRP 積層板の疲労損傷進展シミュレーション",
日本複合材料学会誌, 35, 4 (2009), 141-148.
https://doi.org/10.6089/jscm.35.141 |
77. | 岡部朋永, 茂谷尊, 西川雅章, 橋本雅弘, "繊維強化プラスチックの破壊モード特性に関するマイクロメカニクス",
日本複合材料学会誌, 35,6 (2009), 256-265.
https://doi.org/10.6089/jscm.35.256 |
76. | 吉村彰記,岡部朋永, "結合力要素を用いた分散形複合材料の損傷進展解析",
日本複合材料学会誌, 35, 3 (2009), 112-120.
https://doi.org/10.6089/jscm.35.112 |
75. | M. Nishikawa, T. Okabe and N. Takeda, "Periodic-cell simulations for the microscopic damage and strength properties of discontinuous
carbon fiber-reinforced plastic composites",
Advanced Composite Materials 18 (2009) 77-93.
https://doi.org/10.1163/156855108X399974 |
74. | 中谷隼人, 高坂達郎, 逢坂勝彦, 澤田吉裕, 岡部朋永, "疲労負荷におけるTi/GFRP円孔積層板の損傷進展挙動",
材料, Vol.58, No.5, pp.389-395, May 2009
https://doi.org/10.2472/jsms.58.389 |
73. | Masaaki NISHIKAWA, Tomonaga OKABE and Nobuo TAKEDA, "Effect of the Microstructure on the Fracture Mode of Short-Fiber Reinforced Plastic Composites",
Journal of Solid Mechanics and Materials Engineering Vol.3, No.8, 2009, 998-1009.
https://doi.org/10.1299/jmmp.3.998 |
72. | T. Okabe, M. Nishikawa, "GLS strength prediction of glass-fiber-reinforced polypropylene",
Journal of Materials Science 44(1):331-334, January 2009
https://doi.org/10.1007/s10853-008-3144-6 |
71. | M. Nishikawa, T. Okabe and T. Honda, "Effect of cross-links on the pullout of carbon nanotubes from amorphous polymer",
Journal of Materials Science 44(1):339-341, December 2009
https://doi.org/10.1007/s10853-008-3127-7 |
70. | Shigeki YASHIRO, Tomonaga OKABE, "Numerical Prediction of Fatigue Damage Progress in Holed CFRP Laminates Using Cohesive Elements",
Journal of Solid Mechanics and Materials Engineering Vol3, No.11, 2009, 1212-1221.
https://doi.org/10.1299/jmmp.3.1212 |
69. | Tomonaga OKABE and Shigeki YASHIRO, "Numerical Simulation for Predicting Fatigue Damage Progress in Notched CFRP Laminates by Using Cohesive Elements",
Journal of Solid Mechanics and Materials Engineering Vol.3 No.11 2009, 1202-1211.
https://doi.org/10.1299/jmmp.3.1202 |
68. | T. Okabe, M. Nishikawa, W. A. Curtin, "Estimation of statistical strength distribution of Carborundum polycrystalline
SiC fiber using the single fiber composite with consideration of the matrix hardening",
Composite Science and Technology 68 (2008) 3067-3072.
https://doi.org/10.1016/j.compscitech.2008.06.026 |
67. | I. Taketa, T. Okabe, A. Kitano, "A new compression-molding approach using unidirectionally arrayed chopped strands",
Composites: Part A 39 (2008) 1884-1890.
https://doi.org/10.1016/j.compositesa.2008.09.012 |
66. | N. Hu, Y. Zemba, T. Okabe, C. Yan, H. Fukunaga, A. M. Elmarakbi, "A new cohesive model for simulating delamination propagation in composite laminates under transverse loads",
Mechanics of Materials 40 (2008) 920-935.
https://doi.org/10.1016/j.mechmat.2008.05.003 |
65. | T. Okabe, M. Nishikawa, N. Takeda, "Numerical modeling of progressive damage in fiber reinforced plastic cross-ply laminates",
Composites Science and Technology 68 (2008) 2282 - 2289.
https://doi.org/10.1016/j.compscitech.2008.04.021 |
64. | M. Nishikawa, T. Okabe, N. Takeda and W. A. Curtin, "Micromechanics of the fragmentation process in single-fiber composites",
Modeling and Simulation in Materials Science and Engineering 16 (2008) 055009.
https://doi.org/10.1088/0965-0393/16/5/055009 |
63. | M. Nishikawa, T. Okabe, K. Hemmi, N. Takeda, "Micromechanical modeling of the microbond test to quantify the interfacial properties in fiber-reinforced composites", International Journal of Solids and Structures 45 (2008) 4098-4113. |
62. | M. Nishikawa, T. Okabe, N. Takeda, "Determination of interface properties from experiments on the fragmentation process in single-fiber composites",
Materials Science and Engineering A 480 (2008) 549-557.
https://doi.org/10.1016/j.msea.2007.07.067 |
61. | 山下耕司, 岡部朋永, "繊維強化セラミックスの破断ひずみに界面特性がおよぼす効果",
材料, Vol.57 No.5,pp.448-453, May 2008
https://doi.org/10.2472/jsms.57.448 |
60. | Shigeki YASHIRO, Junji TAKATSUBO, Nobuyuki TOYAMA, Tomonaga OKABE, Nobuo TAKEDA, "Nondestructive Evaluation of Holed CFRP Laminates by a New Technique to Visualize Propagation of Ultrasonic Waves",
Journal of Solid Mechanics and Materials Engineering Vol. 2, No. 3 (2008) 333-341.
https://doi.org/10.1299/jmmp.2.333 |
59. | N. Hu, K. Nunoya, D. Pan, T. Okabe, H. Fukunaga, "Prediction of buckling characteristics of carbon nanotubes",
International Journal of Solids and Structures 44 (2007) 6535-6550.
https://doi.org/10.1016/j.ijsolstr.2007.02.043 |
58. | Masaaki Nishikawa, Tomonaga Okabe, Nobuo Takeda, "Numerical simulation of interlaminar damage propagation in CFRP cross-ply laminates under transverse loading",
International Journal of Solids and Structures 44 ( 2007) 3101-3113. (19th hottest article in Science direct in January-March 2007 )
https://doi.org/10.1016/j.ijsolstr.2006.09.007 |
57. | S. C. Chowdhury, T. Okabe, "Computer simulation of carbon nanotube pull-out from polymer by the molecular dynamics method",
Composites: Part A 38 (2007) 747-754.
https://doi.org/10.1016/j.compositesa.2006.09.011 |
56. | S. Yashiro, T. Okabe, N. Takeda, "Damage identification in a holed CFRP laminate using a chirped fiber Bragg grating sensor",
Composites Science and Technology 67 (2007) 286-295.
https://doi.org/10.1016/j.compscitech.2006.08.004 |
55. | S. Yashiro, T. Okabe, N. Toyama, N. Takeda, "Monitoring damage in holed CFRP laminates using embedded chirped FBG sensors",
International Journal of Solids and Structures 44 (2007) 603-613.
https://doi.org/10.1016/j.ijsolstr.2006.05.004 |
54. | 岡部朋永, 石井健介, 西川雅章, 武田展雄, "一方向CFRP 複合材料の引張強度予測", 日本複合材料学会誌, 33, 6 (2007), 205-212.
https://doi.org/10.6089/jscm.33.205 |
53. | 西川雅章, 岡部朋永, 武田展雄, "結合力要素を用いた単繊維複合材料中の微視的損傷に関する有限要素解析",
日本複合材料学会誌, 33, 5 (2007), 170-177.
https://doi.org/10.6089/jscm.33.170 |
52. | Sayaka OKABE , Nobutada OHNO and Tomonaga OKABE, "Influence of Matrix Plasticity on Local Stress Concentrations Near Loaded Fiber Breaks",
Journal of Solid Mechanics and Materials Engineering Vol. 1, No. 1, 2007, 102-113.
https://doi.org/10.1299/jmmp.1.102 |
51. | S. YASHIRO, K. MURAI, T. OKABE and N. TAKEDA, "Numerical study for identifying damage in open-hole composites with embedded FBG sensors and its application to experiment results",
Advanced Composite Materials Vol. 16, No. 2, pp.115-134 (2007)
https://doi.org/10.1163/156855107780918946 |
50. | AKINORI YOSHIMURA, SHIGEKI YASHIRO, TOMONAGA OKABE and NOBUO TAKEDA, "Characterization of Tensile Damage Progress in Stitched CFRP Laminates",
Advanced Composite Materials Vol.16, No. 3, pp.223-244 (2007)
https://doi.org/10.6089/jscm.32.198 |
49. | 矢代茂樹,高坪純治,遠山暢之,岡部朋永,武田展雄, "超音波伝ぱの可視化による有孔CFRP積層板中の層間はく離検出",
日本機械学会論文集(A編) 72巻 724号 (2006-12) 1882-1887.
https://doi.org/10.1299/kikaia.72.1882 |
48. | 西川雅章, 岡部朋永, 武田展雄, "面外負荷を受けるCFRP直交積層板の層間はく離進展シミュレーション",
日本機械学会論文集(A編) 72巻 720号 (2006-8) 1246-1253.
https://doi.org/10.1299/kikaia.72.1246 |
47. | Tomonaga Okabe, Masaaki Nishikawa, Nobuo Takeda, Hideki Sekine, "Effect of matrix hardening on the tensile strength of alumina fiber-reinforced aluminum matrix composites",
Acta Materialia 54 (2006) 2557-2566.
https://doi.org/10.4028/www.scientific.net/KEM.430.83 |
46. | N. Takeda, S. Yashiro, T. Okabe, "Estimation of the damage patterns in notched laminates with embedded FBG sensors",
Composites Science and Technology 66 (2006) 684-693.
https://doi.org/10.1016/j.compscitech.2005.07.039 |
45. | Hideki Sekine, Shin-Etsu Fujimoto, Tomonaga Okabe, Nobuo Takeda, Toshimitsu Yokobori, Jr., "Structural Health Monitoring of Cracked Aircraft Panels Repaired with Bonded Patches Using Fiber Bragg Grating Sensors",
Applied Composite Materials 13(2):87-98 January 2006.
https://doi.org/10.1007/s10443-006-9011-1 |
44. | 吉村彰記, 矢代茂樹, 岡部朋永, 武田展雄, "縫合CFRP積層材の引張負荷下における損傷進展挙動",
日本複合材料学会誌, 32, 5 (2006), 198-207.
https://doi.org/10.6089/jscm.32.198 |
43. | Junji NODA, Tomonaga OKABE, Nobuo TAKEDA and Masao SHIMIZU, "Tensile strength of CFRP cross-ply laminates containing transverse cracks",
Advanced Composite Materials, 15 (2006), 81-93.
https://doi.org/10.1163/156855106776829338 |
42. | KOICHI GODA, TOMONAGA OKABE and NOBUO TAKEDA, "A strength reliability model of unidirectional fiber-reinforced ceramic matrix composites
by Markov process",
Advanced Composite Materials Vol. 15, No. 3, pp.263-285 (2006)
https://doi.org/10.1163/156855106778392089 |
41. | 岡部朋永, 西川雅章, 武田展雄, "FRP直交積層板における損傷進展を対象とした数値シミュレーション",
日本機械学会論文集(A編) 72巻 720号 (2006-8) 1254-1261.
https://doi.org/10.1299/kikaia.72.1254 |
40. | 矢代茂樹, 村井一恵, 岡部朋永, 武田展雄, "埋め込みFBGセンサを用いた有孔積層板の損傷同定に関する数値解析および実験結果への適用",
日本複合材料学会誌, 32, 5 (2006), 208-217.
https://doi.org/10.6089/jscm.32.208 |
39. | N. Toyama, S. Yashiro, J. Takatsubo, T. Okabe, "Stiffness evaluation and damage identification in composite beam under tension using Lamb waves",
Acta Materialia 53 (2005) 4389-4397.
https://doi.org/10.1016/j.actamat.2005.05.043 |
38. | 合田公一, 岡部朋永, "個々の要素損傷をマルコフ過程で表現したセラミックス基繊維強化複合材料の強度信頼性モデル",
日本機械学会論文集(A編) 71巻 706号 (2005-6) 919-927.
https://doi.org/10.1299/kikaia.71.919 |
37. | T. Okabe, H. Sekine, K. Ishii, M. Nishikawa, N. Takeda, "Numerical method for failure simulation of unidirectional fiber-reinforced composites with spring element model",
Composites Science and Technology 65 (2005) 921-933.
http://dx.doi.org/10.1016/j.compscitech.2004.10.030 |
36. | 深沢剣吾, 渋谷正樹, 岡部朋永, 清水真佐男, 川嵜一博, "切欠底の疲労強度の確率的変動に注目した高強度鋼切欠材の疲労強度特性に関する研究",
日本機械学会論文集 (A編) 71巻 704号 (2005-4) 623-629.
https://doi.org/10.1299/kikaia.71.623 |
35. | S. Yashiro, N. Takeda, T. Okabe, H. Sekine, "A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors",
Composites Science and Technology 65 (2005) 659-667.
https://doi.org/10.1016/j.compscitech.2004.09.022 |
34. | 野田淳二, 岡部朋永, 武田展雄, 清水真佐男, "[90/0]s GFRP直交積層材の損傷進展挙動", 日本複合材料学会誌, 31, 3 (2005), 112-119.
https://doi.org/10.6089/jscm.31.112 |
33. | N. TOYAMA, T. OKABE, "Effects of tensile strain and transverse cracks on Lamb-wave velocity in cross-ply FRP laminates",
JOURNAL OF MATERIALS SCIENCE 39 (2004) 7365-7367.
https://doi.org/10.1023/B:JMSC.0000048752.28719.3a |
32. | 野田淳二, 岡部朋永, 武田展雄, 清水真佐男, "GFRP直交積層材の損傷進展挙動",
日本機械学会論文集(A編) 70巻 698号 (2004-10) 1364-1369.
https://doi.org/10.1299/kikaia.70.1364 |
31. | T. Okabe, H. Sekine, J. Noda, M. Nishikawa, N. Takeda, "Characterization of tensile damage and strength in GFRP cross-ply laminates", Materials Science and Engineering A 383 (2004) 381-389. https://doi.org/10.1016/j.msea.2004.05.060 |
30. | N. Ohno, S. Okabe, T. Okabe, "Stress concentrations near a fiber break in unidirectional composites with interfacial slip and matrix yielding",
International Journal of Solids and Structures 41 (2004) 4263-4277.
https://doi.org/10.1016/j.ijsolstr.2004.03.018 |
29. | 岡部沙也佳, 大野信忠, 岡部朋永, "繊維破断を有する一方向長繊維強化複合材における局所的応力集中に対する解析解",
日本機械学会論文集(A編) 70巻 691号 (2004-3) 464-471.
https://doi.org/10.1299/kikaia.70.464 |
28. | S. Okabe, N. Ohno and T. Okabe, "Analytical Solutions for Stress Concentrations near a Fiber Break in Unidirectional Elastoplastic Composites",
Key Engineering Materials Vols. 274-276 (2004) pp. 1005-1010.
https://doi.org/10.4028/www.scientific.net/KEM.274-276.1005 |
27. | Z. Xia, T. Okabe, J. B. Park, W. A. Curtin, N. Takeda, "Quantitative damage detection in CFRP composites: coupled mechanical and electrical models",
Composites Science and Technology 63 (2003) 1411-1422.
https://doi.org/10.1016/S0266-3538(03)00083-6 |
26. | N. Toyama, J. Noda, T. Okabe, "Quantitative damage detection in cross-ply laminates using Lamb wave method",
Composites Science and Technology 63 (2003) 1473-1479.
https://doi.org/10.1016/S0266-3538(03)00163-5 |
25. | N. TOYAMA, T. OKABE, N. TAKEDA, "Lamb wave evaluation and localization of transverse cracks in cross-ply laminates",
JOURNAL OF MATERIALS SCIENCE 38 (2003) 1765-1771.
https://doi.org/10.1023/A:1023288012638 |
24. | 深沢剣吾, 岡部朋永, 小茂鳥潤, 清水真佐男, "実験とシミュレーションの組合せ手法による高強度鋼の長寿命域疲労破壊特性の解明",
日本機械学会論文集(A編) 69巻 679号 (2003-3) 617-625.
https://doi.org/10.1299/kikaia.69.617 |
23. | Tomonaga OKABE and Kei URABE, "MONITORING OF FILLER DISTRIBUTION IN RESIN WITH AN ELECTROMAGNETIC WAVE TRANSMISSION LINE",
Advanced Composites Letters, Vol.12, No.2 (2003) 63-68.
https://doi.org/10.1177/096369350301200203 |
22. | Jae Beom Park, Tomonaga Okabe and Nobuo Takeda, "New concept for modeling the electromechanical behavior of unidirectional carbon-fiber-reinforced plastic under tensile loading",
Smart Materials and Structures 12 (2003) 105-114.
http://dx.doi.org/10.1088/0964-1726/12/1/312 |
21. | 遠山暢之, 岡部朋永, 高坪純治, 武田展雄, "ラム波伝播速度変化を利用した繊維強化プラスチックにおけるトランスバースクラックの定量モニタリングおよび位置標定精度向上", 非破壊検査, 52, 1 (2003), 32-38. |
20. | 野田淳二, 岡部朋永, 武田展雄, 清水真佐男, "トランスバースクラックを有するCFRP直交積層板の引張強度",
日本複合材料学会誌, 29, 5 (2003), 177-183
https://doi.org/10.6089/jscm.29.177 |
19. | T. Okabe, N. Takeda, "Size effect on tensile strength of unidirectional CFRP composites-experiment and simulation",
Composites Science and Technology 62 (2002) 2053-2064.
https://doi.org/10.1016/S0266-3538(02)00146-X |
18. | T. Okabe, N. Takeda, "Elastoplastic shear-lag analysis of single-fiber composites and strength prediction of unidirectional multi-fiber composites",
Composites: Part A 33 (2002) 1327-1335.
https://doi.org/10.1016/S1359-835X(02)00170-7 |
17. | Z. Xia, W. A. Curtin, T. Okabe, "Green's function vs. shear-lag models of damage and failure in fiber composites",
Composites Science and Technology 62 (2002) 1279-1288.
https://doi.org/10.1016/S0266-3538(02)00073-8 |
16. | Z. Xia, T. Okabe, W. A. Curtin, "Shear-lag versus finite element models for stress transfer in fiber-reinforced composites",
Composites Science and Technology 62 (2002) 1141-1149.
https://doi.org/10.1016/S0266-3538(02)00072-6 |
15. | Kei Urabe, Tomonaga Okabe, Hiroshi Tsuda, "Monitoring of resin flow and cure with an electromagnetic wave transmission line using carbon fiber as conductive elements",
Composites Science and Technology 62 (2002) 791-797.
https://doi.org/10.1016/S0266-3538(02)00047-7 |
14. | NOBUYUKI TOYAMA, TOMONAGA OKABE, NOBUO TAKEDA, TERUO KISHI, "Effect of transverse cracks on lamb wave velocity in CFRP cross-ply laminates",
JOURNAL OF MATERIALS SCIENCE LETTER, 21, 2002, 271-273.
https://doi.org/10.1023/A:1017925315239 |
13. | J. B. Park, T. Okabe, N. Takeda, W. A. Curtin, "Electromechanical modeling of unidirectional CFRP composites under tensile loading condition",
Composites: Part A 33 (2002) 267-275.
https://doi.org/10.1016/S1359-835X(01)00097-5 |
12. | FANG MING ZHAO, TOMONAGA OKABE and NOBUO TAKEDA, "Effect of matrix yield properties on fragmentation behavior of single fiber composites",
Composite Interfaces, Vol.9, No.3, pp.289-308 (2002).
https://doi.org/10.1163/156855402320257366 |
11. | Tomonaga Okabe, Nobuo Takeda, "Estimation of strength distribution for a fiber embedded in a single-fiber composite: experiments and statistical simulation based on the elasto-plastic shear-lag approach",
Composites Science and Technology 61 (2001) 1789-1800.
https://doi.org/10.1016/S0266-3538(01)00080-X |
10. | T. Okabe, N. Takeda, Y. Kamoshida, M. Shimizu, W. A. Curtin, "A 3D shear-lag model considering micro-damage and statistical strength prediction of unidirectional fiber-reinforced composites",
Composites Science and Technology 61 (2001) 1773-1787.
https://doi.org/10.1016/S0266-3538(01)00079-3 |
9. | M. Yanaka, Y. Tsukahara, T. Okabe, N. Takeda, "Statistical Analysis of Multiple Cracking Phenomenon of a SiOx Thin Film on a Polymer Substrate",
JOURNAL OF APPLIED PHYSICS Vol.90, No.2 (2001) 713-719.
https://doi.org/10.1063/1.1379355 |
8. | TOSHIMICHI OGISU, NORIO ANDO, JUNJI TAKAKI, TOMONAGA OKABE AND NOBUO TAKEDA, "Improved Surface Treatment of SMA Foils and Damage Suppression of SMA-Foil Embedded CFRP Laminates",
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol.12-April 2001, 265-270.
https://doi.org/10.1106/9APU-Q5EC-44TY-FF0V |
7. | Fang Ming Zhao, Tomonaga Okabe, Nobuo Takeda, "The estimation of statistical fiber strength by fragmentation tests of single-fiber compositess",
Composites Science and Technology 60 (2000) 1965-1974.
https://doi.org/10.1016/S0266-3538(00)00084-1 |
6. | Kazunori Misawa, Tomonaga Okabe, Masaaki Yanaka, Masao Shimizu, Nobuo Takeda, "A Theory for Multi Damage Evaluation of TiN Thin Film",
Materials Research Society Symposium Proceedings, 653 (2000), Z7.10.1-6. https://doi.org/10.1557/PROC-653-Z7.10 |
5. | T. OKABE, N. TAKEDA, J. KOMOTORI, M. SHIMIZU and W.A.CURTIN, "A NEW FRACTURE MECHANICS MODEL FOR MULTIPLE MATRIX CRACKS OF SiC FIBER REINFORCED BRITTLE-MATRIX COMPOSITES",
Acta Materialia Vol.47 No.17, pp.4299-4309, 1999.
https://doi.org/10.1016/S1359-6454(99)00309-2 |
4. | T. OKABE, J. KOMOTORI, M. SHIMIZU, N. TAKEDA, "Mechanical behavior of SiC fiber reinforced brittle-matrix composites",
JOURNAL OF MATERIALS SCIENCE 34 (1999) 3405–3412.
https://doi.org/10.1023/A:1004637300310 |
3. | 岡部朋永, 武田展雄, 今井克広, 小茂鳥潤, 清水真佐男, 今井義一, "SiC繊維強化耐熱ガラス基直交積層板における損傷進展過程",
日本機械学会論文集(A編) 65巻 631号 (1999-3) 621-627.
https://doi.org/10.1299/kikaia.65.621 |
2. | T. Okabe, N.Takeda, J. Komotori, M. Shimizu, K. Imai and Y. Imai, "Tensile matrix cracking behavior of Hi-Nicalon fiber/glass matrix cross-ply laminate composites",
Key Engineering Materials Vols. 164-165 (1999) pp.221-224.
https://doi.org/10.4028/www.scientific.net/KEM.164-165.221 |
1. | 岡部朋永, 武田展雄, 今井克広, 小茂鳥潤, 清水真佐男, 今井義一, "一方向SiC繊維強化耐熱ガラス基複合材料における損傷進展過程",
日本機械学会論文集(A編) 64巻 628号 (1998-12) 2931-2937.
https://doi.org/10.1299/kikaia.64.2931 |